Clubcento

Clubcento - The UK Small Fiats Club

Run by Enthusiasts FOR Enthusiasts

It is currently Sun Dec 17, 2017 1:17 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: haynes manual
PostPosted: Sun Nov 07, 2010 1:13 am 
Offline
Clubcento Member
User avatar

Joined: Mon Mar 26, 2007 10:47 pm
Posts: 3182
Location: Oakes - Huddersfield - west yorks
Drives: Panda / Thundercet
http://cgi.ebay.co.uk/U.S.S.-USS-ENTERP ... a6ff6fbdd0
so mr fixit - care to help me change the coolant?

_________________
Image


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Sun Nov 07, 2010 2:41 am 
Offline
Chief Engineer
User avatar

Joined: Thu Mar 22, 2007 9:20 pm
Posts: 10660
Location: Teesside
Drives: Panda 100hp
Go on then. I'll see if I can get trade card discount on 250,000 litres of warp plasma coolant.

_________________
Pete, technical bod.

.....make it idiot proof and someone will build a better idiot.


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Sun Nov 07, 2010 10:09 am 
Offline
Advanced
User avatar

Joined: Mon Mar 26, 2007 8:18 am
Posts: 4406
Location: Sunny Spalding
Drives: it like he stole it
I see it doesn't list the XCV 330 class, but I suppose as they are similar mechanically would that manual do?

_________________
Dutch bears have terrible skin due to their clogged paws


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Sun Nov 07, 2010 4:59 pm 
Offline
Chief Engineer
User avatar

Joined: Thu Mar 22, 2007 9:20 pm
Posts: 10660
Location: Teesside
Drives: Panda 100hp
As you say, mechanically they are similar. I wouldn't use it for reference if working on the Heisenberg compensators though, there are subtle differences and you don't want a transporter accident. That can sometimes take a bit of mopping up afterwards.

_________________
Pete, technical bod.

.....make it idiot proof and someone will build a better idiot.


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Mon Nov 08, 2010 1:54 pm 
Offline
Clubcento Member
User avatar

Joined: Mon Mar 26, 2007 10:47 pm
Posts: 3182
Location: Oakes - Huddersfield - west yorks
Drives: Panda / Thundercet
fixitagaintomorrow wrote:
As you say, mechanically they are similar. I wouldn't use it for reference if working on the Heisenberg compensators though, there are subtle differences and you don't want a transporter accident. That can sometimes take a bit of mopping up afterwards.

and usually a new 1st Officer .

From what I read , the original turbolift doors operated with the central locking and handbrake mechanism from a cento.

http://www.youtube.com/watch?v=JZAkGfJY05k

would explain a few of these then

_________________
Image


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Mon Nov 08, 2010 3:21 pm 
Offline
Advanced
User avatar

Joined: Fri Mar 23, 2007 7:12 pm
Posts: 6602
Location: Surrey
Drives: Cinquecento x2 & Bravo
i just bought this one

http://www.haynes.co.uk/webapp/wcs/stor ... &langId=-1

8)

this one caught my eye too

http://www.haynes.co.uk/webapp/wcs/stor ... &langId=-1

:P

_________________
http://500blog.blogspot.com/2009/08/new-fiat-500-clubcento.html


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Mon Nov 08, 2010 3:55 pm 
Offline
Chief Engineer
User avatar

Joined: Thu Mar 22, 2007 9:20 pm
Posts: 10660
Location: Teesside
Drives: Panda 100hp
Quote:
it must be something to do with the pistons


Aaaah, I wondered where I was going wrong with the Mazda :lol:

_________________
Pete, technical bod.

.....make it idiot proof and someone will build a better idiot.


Top
 Profile  
 
 Post subject: Re: haynes manual
PostPosted: Mon Nov 08, 2010 4:06 pm 
Offline
Advanced
User avatar

Joined: Mon Mar 26, 2007 8:18 am
Posts: 4406
Location: Sunny Spalding
Drives: it like he stole it
Quote:
offers down-to-earth advice (but no step-by-step photos)


I won't bother buying it then

_________________
Dutch bears have terrible skin due to their clogged paws


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group