Clubcento

Clubcento - The UK Small Fiats Club

Run by Enthusiasts FOR Enthusiasts

It is currently Wed Nov 21, 2018 9:28 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Hi
PostPosted: Sun Apr 06, 2014 7:51 am 
Offline

Joined: Sat Apr 05, 2014 7:24 am
Posts: 4
Drives: 1
Hello to everyone my names keith.Just bought an 899 sx seicento to use for work.Its a w reg with a genuine 26,500 miles on the clock.Had to put a rear section on the exhaust but only paid £475 for the car so no great hardship.Also gave it an oil and filter change and am looking at fitting a water temperature gauge as i dont trust the little red light.Has anyone else fitted one of these if so where's the best place to fit the adaptor for the sender top hose ??????.I do a round trip of about 45 miles a day on A and B roads and so far everything seems good.


Top
 Profile  
 
 Post subject: Re: Hi
PostPosted: Sun Apr 06, 2014 12:51 pm 
Offline
Chief Engineer
User avatar

Joined: Thu Mar 22, 2007 9:20 pm
Posts: 10660
Location: Teesside
Drives: Panda 100hp
Hi and welcome. The Cinquecento has a water temp gauge on the same engine, I'm guessing there will be a hole for a sender there on the Sei too.

_________________
Pete, technical bod.

.....make it idiot proof and someone will build a better idiot.


Top
 Profile  
 
 Post subject: Re: Hi
PostPosted: Sun Apr 06, 2014 3:09 pm 
Offline
Membership secretary
User avatar

Joined: Mon Apr 02, 2007 8:10 pm
Posts: 1814
Location: Northwich, Cheshire
Drives: Cinquecento Abarth 1242
Sounds like you got a bargain to me! I too don't trust the red light, ive seen it come on before and that was after the steam and hissing noises has started :lol:

_________________
Rusty the soon to be 1242 TURBO Cinquecento Abarth


Top
 Profile  
 
 Post subject: Re: Hi
PostPosted: Sun Apr 06, 2014 6:07 pm 
Offline
Intermediate

Joined: Mon Mar 31, 2014 1:58 pm
Posts: 18
Location: Milano
Drives: Fiat 600
Welcome :D


Top
 Profile  
 
 Post subject: Re: Hi
PostPosted: Fri Apr 11, 2014 8:54 pm 
Offline

Joined: Sat Apr 05, 2014 7:24 am
Posts: 4
Drives: 1
Thanks for the welcomes.I am going to fit the temperature gauge and put the adaptor in the top hose,i measured the hose and appears to be 36mm o/d to try and save a job does anyone have any idea what the inside diameter is.Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group